Общие сведения
Название:CNC Vertical Lathe (SLC100Q / SLC125Q /
Модель:SLC100Q / SLC125Q / SLC200Q / SLC250Q
Тип:Токарный станок
Product Description

This series machine is suitable for finely and roughly turning cylinder and inner hole, inner and outer taper, surfacing, grooving, threading and curving of the ferrous, nonferrous metal and some kinds of non-metal materials with carbide and porcelain tools.

The maximum speed can be 2000m/min when in high-speed turning. When the head is in high-speed movement, head in horizontal direction, and vertical rapid movement speed can be 12m/min.
The main drive adopts AC spindle servomotor within two steps (ZF gearbox, Germany). The high-speed rotating workpieces are balanced in static or dynamic pattern. Transmission gears with 5 grade precision are specially grounded to implement high efficient transmission, lower noise and smooth running in high speed turning.
SLC100Q, SLC125Q Feed system is driven by AC servomotor which is connected with ballscrew by flexible couple to implement clearance-free transmission and high precision turning.

The columns, whose thermal symmetric construction, is calculated by finite element method, stand on table base. Effective vibration-insulated method is adopted to ensure high rigidity and strong anti-vibration ability.
The table is thermal-symmetric construction. The spindle is centered by high-precision double-row short cylindrical roller bearing whose radial clearance can be adjusted. With large high-precision thrust ball bearing on axial direction as rolling guideway, and oil temperature cooling device, the table has high swiveling precision, larger load ability and smaller deformation.
On customers' requirement, the followings can be supplied: Magazine, built-in tool setting device, boring & milling, table indexing and feed, grounding cooling device, left head and whole-loop control, etc.
Chip conveyer and half-closed guide are also equipped by costumers' reguirements.

Linear dual-direction roller guideway is applied to ensure high effective transmission and good precision reliability in heads and RAM feed movement.
CNC system is SEMENS or FANUC system, and other CNC system is also can be provided on customers' special requirements.
This series machine is divided into high-speed type, standard type and heavy-duty type.

  Table diameter900mm1000mm1600mm1800mm
Max.turning diameter1000mm  1250mm2000mm2500mm
Max.height of workpiece800/1000mm1000/1250mm1250/1600mm1600/2000mm
Max.weight of workpiece2T5T12T16T
Steps of table speedMechanical, Variable speed
Speed range of table  4~500rpm3.15~400rpm1.25~160rpm1~100rpm
Max.cutting force of tool head16kn  32kn40kn
Max.torque of table6.3kn.m8kn.m25kn.m40kn.m
Horizontal guideway pair of railheadRoll  Combination Roll  
T ram Guideway pairRoll      
T ram Horizontal travel-20~720mm-20~850mm-20~1250mm-20~1470mm
T ram Vertical travel650/800mm800/1000mm800/1000mm1250/1400mm
T ram Position of turret4/8  4/64/6
Square ram guideway pairSliding/ Combination Roll
Square ram Horizontal travel550mm-20~780mm-20~1250mm-20~1470mm
Square ram Vertical travel650/800mm1000/1250mm1400/1600mm1400/1600mm
Square ram Position of turret-12
Rapid travel12m/min  6m/min  
Main powerS1:28kw S2:38kwAC 28kwDC 55kw  
Travel of cross rail500mm700/1000mm1000/1200mm1250/1500mm
Grade positioning of cross rail57/105/6  
Pitch positioning of cross rail100mm100mm200mm250mm
Total power50kw51kw95kw  
Total weight(Approx.ton)13T17/18T32/33T35/37T

Сайт поставщика: madeinchina.com

Наши услуги:

  • восстановление изношенных деталей;
  • цветной и нержавеющий прокат со склада в Ростове-на-Дону;
  • механическая обработка металлов( токарные и фрезерные работы);
  • изготовление валов,валков,подшипников скольжения,втулок(баббитовых,бронзовых,латунных,фторопластовых) и др. деталей по вашим чертежам или изделиям.
"Российское станкостроение" 2000-2011. Россия, г.Ростов-на-Дону ул.Орская 9 тел.(863) 290 88 31, 290 88 30, г.Москва ул. Яна Райниса 18
Продажа б/у станков в Ростове
Rambler's Top100 рейтинг@Mail.ru