Features
High precision, high spindle speed with 24 speeds changes.
Ground gear and kinetic-balanced spindle runs smoothly with low noise.
Camlock spindle nose, easy to clamp.
Big thru-bore of spindle to hold bar stock with large diameter.
Big swing over bed suitable for hold special shaped workpiece and dishlike workpiece with large diameter.
High grade casting bed, hardened and precision ground guideways.
Left-handwheel apron and right-handwheel apron are available for users to choose. Each of them equipped with a quick travel device and an easy operated level.
Three-axis sliding mechanism in feed box, giving big feeds and threads ranges. Quick and easy speeds and threading changes.
Tailstock spindle can move at two speeds. Drilling is very easy. The scale on the handwheel indicates the distance the spindle moves.
On user's request, the following accessories are available: Foot brake, taper turning attachment, thread chasing dia (metric or inch), mechanical stop divice quick-change tool post, centralization lubrication device and cross feed quick-release lever.
Model
CS6266B
Swing over bed
600mm
Swing over cross slide
420mm
Swing in gap
870mm (gap bed lathe)
Length in gap
240mm (gap bed lathe)
Max. length of workpiece
100/1500/2000/3000mm
Spindle nose
Ø82mm
Spindle bore
Ø90mm
Range of spindle speed
9-1600rpm 24 steps
Max. output of spindle torque
1500 N.m
Max. travel of compound rest
145mm
Max. travel of cross slide
310mm
Leadscrew pitch
12mm or 2 TPI
Section of tool
25x25mm
Spindle center to tool support
28mm
Longitudinal quick moving speed
4.5m/min, 50HZ ; 5.4m/min, 60HZ
Crosswise quick moving speed
1.9m/min, 50HZ ; 2.3m/min, 60HZ
Longitudinal feeds range
93 kinds, 0.028-6.43 mm/rev
Cross feeds range
93 kinds, 0.012-2.37mm/rev
Metric threads range
48 kinds, 0.5-224 mm
Inch threads range
49 kinds, 72-1/8 TPI
Module threads range
42 kinds, 0.5-122 mm
Diametral threads range
45 kinds, 56-1/4 DP
Dia. of tailstock sleeve
Ø75mm
Morse taper of tailstock sleeve
MT5
Travel of tailstock sleeve
150mm
Cross adjustment
±15mm
Power of main motor
7.5KW (10HP), 3PH, 1450rpm/50HZ; 1750rpm/60HZ
Power of quick-travel motor
250W (1/3HP), 3PH
Power coolant pump
90W (1/8HP), 3PH
Available voltage/cycle
220V,380V,420V/50HZ,60HZ
Overall dimension
263/313/363/463X105X135cm
Packing size
280/330/380/480x115x187cm
Net weight
2400/2600/2800/3000kgs
Gross weight
3075/3250/3450/3650kgs
Main Product: automotive, Automobile maintenance equipment, machine tools, metal forming machine, measuring instruments, Gerneral machine, Metal forming machine