Общие сведения
Название:Drilling and Milling Machine CNC System
Модель:980MDA
Торговая марка:GSK
Управление:ЧПУ
Класс точности:Высокоточный
Автоматизация:Автомат
Тип:Сверлильный станок
Product Description

GSK 980MDa Drilling and Milling Machine CNC System

Technical Specification

1. Control axes: 5 axes (X, Z, Y, 4th and 5th)
2. Interpolation axes: X, Y, Z, 4th and 5th linear interpolation; X, Y and Z three axes linear and spiral interpolation, any two axes arc interpolation;
3. PLC control axes: 5 axes

Feeding axes function

1. Minimum command unit: 0.001mm or 0.0001mm can be selected
2. Position command range: ± 99999999 × Minimum command unit
3. Rapid traverse speed: When the command unit is 0.001mm, the maximum speed is 60m/min; (0.0001mm, the maximum speed is 24m/min)
4. Rapid override: F0, 25%, 50% and 100%, total four levels, real-time adjustment;
5. Feeding override: Total 16 levels: 0-150%, real-time adjustment;
6. Interpolation mode: Linear, arc and spiral interpolation and rigid tapping;
7. Auto chamfering

Acceleration and deceleration function
1. Cutting feeding: Acceleration or deceleration in linear type/index type or front/rear is selectable.
2. Rapid traverse: Acceleration or deceleration in linear type/index type or front/rear is selectable.
3. Tapping: Acceleration or deceleration in linear type/index type or front/rear is selectable.
4. The starting speed, finishing speed and time of acceleration and deceleration are set by the parameter.

Spindle function
1. Analog voltage 0V-10V output in two channels, support two-spindle control
2. Spindle encoder feed back in one channel, the resolution of spindle encoder can be set (0 or 100p/r-5000p/r)
3. Transmission ratio between encoder and spindle is: (1-255): (1-255)
4. Spindle speed: It is specified by S code or PLC signal, the speed range is 0rpm-9999rpm.


Сайт поставщика: madeinchina.com

Наши услуги:

  • восстановление изношенных деталей;
  • цветной и нержавеющий прокат со склада в Ростове-на-Дону;
  • механическая обработка металлов( токарные и фрезерные работы);
  • изготовление валов,валков,подшипников скольжения,втулок(баббитовых,бронзовых,латунных,фторопластовых) и др. деталей по вашим чертежам или изделиям.
"Российское станкостроение" 2000-2011. Россия, г.Ростов-на-Дону ул.Орская 9 тел.(863) 290 88 31, 290 88 30, г.Москва ул. Яна Райниса 18
Продажа б/у станков в Ростове
Rambler's Top100 рейтинг@Mail.ru