Общие сведения
Название:Vertical Lathe (LC5120Q / LC5116Q / LC51
Модель:LC5120Q / LC5116Q / LC5112Q
Тип:Токарный станок
Product Description

This series machine is suitable for machining parts in all industries. On the machine cylindrical turning and boring. Tapering and surfacing as well as grooving and cutting off can be carried out rough and finishing.

The table adopts thrust ball bearing with high accuracy for rolling guideway. Spindle radial is performed NN30 type double row cylindrical rolling bearing. So it can improve the rotary precision and load capacity of the table.
The rail head is equipped with pentagonal turret, and the side head is designed with square turret. The two heads are all adopted the hydraulic balance.
The rail head is adopted sliding leadscrew bearing for transmission in horizontal and vertical movement.
Overall dimensions of machine is beautiful and it is delightful for people to use. It is easily for maintenance and service.
The attachment of side head, digital control and turning taper can provided on special reqirement.
Major electrical components are Siemens.

  Max.turning diameter2000mm1600mm1250mm
Table diameter1800mm1400mm1010mm
Max.height of workpiece1250mm / 1600mm1000mm / 1400mm1000mm / 1400mm
Max.weight of workpiece8/12T5/8T5T
Max.cutting force of rail head25kn  20kn
Max.cutting force of side head20kn  20kn
Max.torque of table32kn.m25kn.m17.5kn.m
Range of table speeds (16steps)2.5~125r/min5~160r/min6.3~200r/min
Swivel of rail head±30°
Range of feed rates (12steps)0.8-86mm/min
Ram travel of rail head800mm  650mm
Ram hor. travel of side head630mm  500mm
Vertical travel of side head1180mm980mm970mm
Rapid traverse of tool heads1800mm/min
Height of tool bar section40mm
Power of main motorAC:37kwAC:30kwAC:22kw
Overall dimensions(L x W x H)3210x4050x4200mm2830X2870X3870mm2360x2470x3480mm
Weight of machine(Approx.)17.5/17.8T13.8T/14.1T8.3T/8.9T

Сайт поставщика: madeinchina.com

Наши услуги:

  • восстановление изношенных деталей;
  • цветной и нержавеющий прокат со склада в Ростове-на-Дону;
  • механическая обработка металлов( токарные и фрезерные работы);
  • изготовление валов,валков,подшипников скольжения,втулок(баббитовых,бронзовых,латунных,фторопластовых) и др. деталей по вашим чертежам или изделиям.
"Российское станкостроение" 2000-2011. Россия, г.Ростов-на-Дону ул.Орская 9 тел.(863) 290 88 31, 290 88 30, г.Москва ул. Яна Райниса 18
Продажа б/у станков в Ростове
Rambler's Top100 рейтинг@Mail.ru