*economical CNC milling machine
*worktable size/mm; 850x320
*x/y/z axis travel/mm: 500x300x360

1)machines have adopted processing machining center base with wide guideways and the guideways have good wear-resistant capability. Main casting parts are made of resin sand that delt with electric furnace smelting, which bestows the machine with a high rigidity. The adoption of ballscrews with bearing at both end has ensured the machine a stable accuracy.

2)With special design of modularization, the users can choose fellowing functions based on the same machine base:
*maual tool change type/semi-automatic tool change type
*servo motor/stepper motor
*three axes linkage/four axes linkage
*worktable enclosed/ full enclosed
*speed changed by gear/speed changed by variable frequency
*optional full cover of machine not only make the machine attactive but also prevent the coolant from leakage.
*automatic tool change is suitable for several continuous complicated processings on the base of one-time tool change
*the gearbox has adopted stepping belts to obtain a high speed and can applied to the processings of drilling, tapping, milling, boring, etc.
*afte adding frequency changer and the adoption of gearbox with gear ratio 1: 4/1: 8, the machines have the function of stepless speed and automatic speed change to gain large torque with low speed, suitable for processing tapping screw thread and milling and cutting larger-diameter hole with low speed.

3)The machines are suitable for drilling, hole-enlarging, reaming, bevel edge, and tapping, for surface milling, step plane, slope, and milling groove, for cutting and milling curve, curve surface and cam, and for the management of several sets of machines

Main machine configuration:
1. Control system: HNC18I controller, HNC servo motor, 3 axis machining.
2. Frequency-changing speed adjustment, 3.0kw frequency-changing spindle motor, 100-3000 rpm spindle. BT40 taper;
3. Pneumatic cylinder for tool dismantle;
4. Fully enclosed splash guard, 3-5 seconds
5. 3206 ball screws;
6. C grade spindle bearing;
7. Separate cooling pumps;
8. Electric concentration lubrication system