1. Box-Column vertical drilling and milling machine;
2. The machine is suitbale for the power source either for 220V or 575V voltage with three phases;
3. Single-speed motor, transducer stepless speed;
4. Strength spindle;
5. With milling function;
6. Spinlde box could be moved up and down, with new type and safety nut;
7. Trchoid thin oil lubrication is available for spindle box. Manual lubrication for guide and nut;
8. Digital readout for spindle speed and cutting depth;
9. Sufficient in travel distance with enough working space;
10. With coolant and protection device;
11. Imported electrical components with CE, CSA and UL sign are to be adopted in the key place;
12. Dia, 6-16mm collect, milling cutter shank, cross table, collet shank and rotary table are all available as optional accessories.
Standard Accessories:
*Key type drill chuck
*Connecting bar for drill chuck
*Shaft sleeve for taper shank tool
*Wedge for tapper shank tool
*Double open end spanner
Specification
Model
PTZX5140
PTZX5150
Max.drilling diameter (steel)
Φ40 mm
Φ50 mm
Max.tapping diameter (steel)
M28 mm
M35 mm
Max.milling cutter diameter
Φ80 mm
Φ80 mm
Max.distance from spindle to guideway surface
400 mm
450 mm
Max.distance between spindle end to the worktable surface
880 mm
1050 mm
Max.spindle stroke
200 mm
280 mm
Max.travel for the spindle box in up and down position
650 mm
750 mm
Spindle taper bore
MT.4
MT.4
Spindle speed steps
Stepless
Stepless
Spindle speed ranges
50~2200 r/min
40~1600 r/min
Spindle feed steps
6
6
Spindle feed range
0.08~0.50 mm/r
0.08~0.50 mm/r
Dimension of worktable (L x W)
700 x 500 mm
800 x 600 mm
Numbers and width of the T slots of worktable
3~18 mm
3~18 mm
Power of main motor
2.2 kw
3.7 kw(VF)
Machine dimension
1310 x820 x2200 mm
1490 x95 0x2370 mm
Packing dimension
1420 x980 x2430 mm
1600 x1100 x2600 mm
Net and gross weight
1100/1300 kg
1350/1500 kg
Sets/20GP container
8
6
Наши услуги:
восстановление изношенных деталей;
цветной и нержавеющий прокат со склада в Ростове-на-Дону;
механическая обработка металлов( токарные и фрезерные работы);
изготовление валов,валков,подшипников скольжения,втулок(баббитовых,бронзовых,латунных,фторопластовых) и др. деталей по вашим чертежам или изделиям.
"Российское станкостроение" 2000-2011. Россия, г.Ростов-на-Дону ул.Орская 9 тел.(863) 290 88 31, 290 88 30, г.Москва ул. Яна Райниса 18
