Общие сведения
Название:CNC Vertical Drilling Machining Center (
Торговая марка:Guheng
Класс точности:Высокоточный
Тип:Многофункциональный центр
Product Description

FMC-650 CNC vertical (drilling) machining center

Direct-driven spindle
Direct-driven spindle from Taiwan.
Low noise. Standard spindle speed can up to 10000rpm. (15000optional)
By direct-driven spindle, the processing ability of the machine can be greatly improved. The character of low noise makes it run smoothly and prolongs its lifetime.

Knife-arm type tool magazine ( For FMC-650)
Special cam drive 20-tool knife arm automatic tool changing. The tool changing time is only 2.2 seconds, tool weight up to 7kg. Tool change smoothly and maintenance is simple. Knife-arm type mechanism is used to change handy tools bidirectional, which can save non-cutting time and improve efficiency.

Controller and operation panel
Controller adopts Japan FANUC 8.4 inch crystal screen control system of high stability. 4-axis is linkage with high stability, high speed and high precision performance. There are circuit board module and crystal function keys on the operation panel, which makes the operation convenient and prolong service time.

Tool clamping and cooling system
Right now the machine employs the current booster used universally in the processing center to discharge tools rapidly and pneumatically. Spindles adopt taper hole of two specifications: BT-40 (FMC), Cooling system employs the cooling water tanks separated from the machine bed, which makes it convenient to replace the coolant liquid. A cooling gas nozzle is provided.

Linear slide way
High-speed and high-precision linear ball slide of Grade P is adopted. Sliding movement is instead of the rolling movement, so the machine is of small abrasion, sensitive response, high positioning precision and long lifetime.

Gas oil and nitrogen weight system
Auto equalized balance system, making use of the theory of accumulator, let the hydraulic cylinder, together with servo motor on the spindle head, moves up and down, thus equiponderate the spindle head and realize high speed and high precision process, lessen burden of servo motor and prolong lifetime of the machine.

High precision ball screw
The machine adopts high precision C3 abrasive class ball screw which is 40mm. On both sides of the guide screw, it supports by bevel ball bearing_three pieces for one group. Besides, to reduce the accumulated heat error and enhance precision, it is through pre stretching.

Servo Adjustment
Adjusting parameter of servo motor by hardware and software can make the controller more compatible with the machine and make processing perfect.

Fourth-axis (Rotary worktable) (optional)
1. Equipped with the fourth axis rotary worktable, the fourth axis can do polyhedral processing and reduce non-processing time for loading and unloading.
2. With worm and worm wheel transmission, it has high precise positioning, though after the long time use, it can still maintain high accuracy.
3. Spindle rotating part employs high-precision bearings to ensure stability of the running center.
4. Minimum split angel is precise and commonly used in the spiral cutting work and sophisticated aerospace industry.

Heat exchange system
Electrical box adopts the heat exchanger to rapidly exhaust heat in the electrical box to maintain constant temperature inside and stabilize the operation of the control system

Herringbone upright column
The design of herringbone pattern strengthens the rigidity of the column and upgrade cutting ability in processing

Machine type FMT-650 FMC-650 Unit   Standard accessories
X axis stroke 650 650 mm   Fanuc Oi mate MD controller
Y axis stroke 450 450 mm   Totally-enclosed type cover
Z axis stroke 450 600 mm   Automatic lubrication system
Distance from spindle nose to table surface 105 ~605 105 ~605 mm   Automatic power off
Distance from spindle center to column 523 523 mm   Spindle air blower
Worktable Dimension of worktable 700 × 450 700 × 450 mm   BT30 Spindle 10000rpm
Max. loading capacity 500 500 kg   BT40 Spindle 10000rpm
T-slot 5 × 14 × 80 5 × 14 × 80 mm   Heat exchanger
Spindle Spindle speed 10000 10000 rpm   Work lamp
Spindle taper ISO NO.30 ISO NO.40     Horizontal adjuster
Spindle diameter 120 120 mm   Mobile hand wheel
Feeding rate Rapid traverse 60/60/48 60/60/48 m/min   Operation manual
Cutting feed rate 1 ~ 8000 1 ~ 8000 mm/min   Maintenance manual
Drive motor   Spindle motor 5.5/7.5 5.5/7.5 Kw  
Chip punching device
X , Y, Z axis drive motor 1.8 1.8 kw Oil-nitrogen weight system
High pressure pump TPHK2T3-3 TPHK2T3-3    Special accessories
Tool-changing system Tool magazine 14 20 pcs FANUC OI MD controller
Auto-type changing tool Turret type Knife-arm type     Mitsubishi M70
Tool shank BT-30 BT-40     Spindle BT-30 15000rpm
Drag link of tool haft 45 45 Degree   Spindle BT-40 15000rpm
Max. tool length 200 200 mm    Spindle oil cooler
Max. tool diameter Ø120 Ø120 mm   High pressure coolant pump
Max. tool weight 3 7 kg   Fourth-axis index plate
Tool changing time 1.2 1.2 sec    
Floor area Machine height 2700 2700 mm    
Area (W × L ) 2000 × 1800 2000 × 1800 mm    
Machine weight 4600 4800 kg    
Driving demand 15 15 KVA    
Barometrical demand 6 6 kgf/cm²    

Сайт поставщика: madeinchina.com

Наши услуги:

  • восстановление изношенных деталей;
  • цветной и нержавеющий прокат со склада в Ростове-на-Дону;
  • механическая обработка металлов( токарные и фрезерные работы);
  • изготовление валов,валков,подшипников скольжения,втулок(баббитовых,бронзовых,латунных,фторопластовых) и др. деталей по вашим чертежам или изделиям.
"Российское станкостроение" 2000-2011. Россия, г.Ростов-на-Дону ул.Орская 9 тел.(863) 290 88 31, 290 88 30, г.Москва ул. Яна Райниса 18
Продажа б/у станков в Ростове
Rambler's Top100 рейтинг@Mail.ru