Main Features:
(1)Large spindle bore of 65mm
(2)Main spindle dynamic balanced, and supported at 2 points with taper roller bearings  
(3)Outward appearance featuring large plains, making the machine more good-looking
Gapped bedways, which are super-audio frequency hardened (HB 450 plus)
(4) All gears hardened and ground by Reishauer grinding machine Leadscrew and feedrod
Interlocked, both with overload protection
(5)Automatic feed stopper
(6)Configuration variable totally according to orders:
(7)Metric or inch system;Right or left hand wheel;Large plane type;Halogen lamp;Quick
Change tool past;DRO;T-slot compound;Chuck guard;Leadscrew hood;Rapid traverse motor;
Electromagnetic brake;Forced lubrication system
MODEL  CD6136B
CD6236B  CD6140B
CD6240B  CD6145B
CD6245B  CD6150B
CD6250B  CD6160B
CD6260B
CAPACITIES  Max.Swing over bed (mm)  360(14)  400(16)  450(18)  500(20)  600(24)
 Max.Swing over cross slide (mm)  185(7'/4")  225(9")  285(11'/4")  325mm(13")  360(14)
 Center distance (mm)  1000, 1500, 2000mm
 Max swing in gap (mm)  490(20)  530(21)  580(23)  630(25)  730(29)
 Valid length of gap  260mm (10/4)
 Bed width  330mm(13)
HEADSTOCK  Spindle hole  65mm(23/5)
 Spindle nose  ISO-C6 or ISO-D6
 Spindle taper  Metric 70mm
 Spindle speeds (Number)  22-1800rpm (15 steps)
FEEDS  Metric threads range (Kinds)  0.5-28mm (66kinds)
 Inch Threads range (Kinds)  1-56 tpi (66kinds)
 Module threads range (Kinds)  0.5-3.5mm (33kinds)
 Diametral threads range (Kinds)  8-56 tpi (33kins)
 Longitudinal fees range (Kinds)  0.072-4.038mm/rev(0.0027-0.15 inch/rev) (66kinds)
 Cross feeds range (Kinds)  0.036-2.019mm/rev(0.0013-0.075 inch/rev) (66kinds)
 Rapid traveling speed of carriage  5m/min (16.4ft/min)
 Leadscrew size:Diameter/Pitch  35mm/6mm(1/4)
CARRIAGE  Cross slide travel  300mm (13)
 Compound rest travel  130mm(5)
 Cross-section size of toolshank  20*20mm  25*20mm/(1*6/8inch)  25*25mm
TAILSTOCK  Taper of tailstock sleeve  Morse No.5
 Diameter of tailstock sleeve  65mm(23/5)
 Travel of tailstock sleeve  120mm(43/4)
MOTOR  Main drive motor  4.0kw or 5.5kw or 7.5kw  7.5kw
 Coolant pump motor  0.125kw
 Rapid traverse moter  0.12kw
Packing Size (L*W*H) (mm)
Center Distance  
1000mm  2420*1150*1800(96*46*7lin.)
1500mm  2920*1150*1800(15*46*7lin.)
2000mm  3460*1150*1800(137*46*7lin.)