| SPECIFICATIONS: | GH1440W | STANDARD EQUIPMENT |
Swing Over Bed:
| 360mm 14" | 6" 3 jaw chuck
|
| Swing Over Carriage: | 220mm 8-5/8" | Full length splash guard |
Swing Over Gap:
| 506mm 20" | Dead center |
| Width of Bed: | 260mm 10" | Reduction sleeve |
| Distance Between Centers: | 1000mm 40"
| Coolant system |
| Taper of Spindle Bore: | MT NO.5 | Chuck Guard & Leadscrew Cover |
| Diameter of Spindle Thru Hole: | 40mm 1-1/2"
| Steady rest |
| Number of Spindle Speeds: | 12 2Ranges | Follow rest |
| Range of Spindle Speeds: | 40 ~ 1800RPM | 8" 4 jaw chuck
|
| Spindle Nose: | D1-4
| Face plate (12") |
| Metric Pitch Threiads: | 0.25~10 (24kinds) | OPTIONAL ACCESSORIES |
| Whit-Worth Threads: | 160-3.5 (35kinds)
| Taper turning attachment
|
| Range of Longitudinal Feeds: | 0.015-0.72mm (0.0075"-0.36"in/rev) | Quick change tool post |
| Range of Cross Feeds: | 0.010-0.368 (0.0005"-0.784"in/rev) | Digital readout device |
| Diameter of Leadscrew: | 22mm 7/8" | Collet attachment |
| Pitch Threads of Leadscrew: | 4mm ( 8T.P.I ) | |
| Travel of Tailstock Quill: | 120mm (4-3/4") | |
| Diameter of Tailstock Quill: | 45mm (1-25/32") | |
| Taper Hole of Tailstock Quill: | MT NO.3 | |
| Main Motor Power: | 2.2kw ( 3HP/1HP ) | |
| Coolant Pump Motor Power: | 0.04kw (0.055HP) | |
| Overall Dimentions of Lathe(L x W x H): | 1920 x 740 x 1150mm | |
| Packing Size of Lathe(L x W x H): | 1970 x 760 x 1460mm | |
| Net Weight: | 1050kg (2310lbs) | |
| Gross Weight: | 1150kg (2530lbs) |
|
