Heavy Duty Conventional Horizontal Lathe-CW61100B:
1. Max. Swing over bed is dia. 1000mm.
2. Max length of workpiece is 10000mm.
3. Max weight of workpiece is 6tons.
Heavy Duty Conventional Horizontal LatheCW61100B parallel lathes are suitable for turning of cast iron and steel workpieces, turning of non-ferrous metal parts of big or medium sizes. It can do external cylindrical surface turning, inner hole and end face turning, groove broaching, drilling, boring and trepanning. It can also turn various intemal and external metric, inch module and diametrical pitch threads, the top slide can be used independently for turning of short taper.
These lathes are of high power, high rigidity and wide rotating speed range, so it can be used for high speed and strong force turning.
Main Specifications
Working Scope
Swing over bed
mm
1000
Swing over carriage
mm
630
Maximum length of workpiece
mm
1500,3000,5000,6000,8000,10000
Maximum turning length
mm
1300,2800,4800,5800,7800,9800
Width of guideway
mm
755
Spindle
Spindle nose code
..
A215
Diameter of spindle thru hole
mm
130
Taper hole of spindle
mm
140
Number of spindle speeds
.
3.15-315
.
21
Feed motion
Longitudinal and cross feeds
mm
56;0.1-12
Cross-to-longitudinal feed rate
.
1/2
Number and range of metric thread
mm
44;1-120
Number and range of inch thread
.
31;28-1/4(TPI)
Number and range of module thread
mm
45;0.5-60
Number and range of diametrical pitch thread
.
38;56-1/2(TPI)
Rapid traverse speed of carriage
mm/min
3740
Tool post
Max.travel of cross slide
mm
520
Max.travel of top slide
mm
300
section of tool shank
mm
45×45
Tailstock
Diameter of Tailstock quill
mm
160
Travel of tailstock quill
mm
300
Taper Hole of Tailstock quill
Morse
6
Main motor power
kw
22
Machine mass
kg
9200,10200,12100,12600,14500,16400
Machine overall dimensions(lenght×width×height)
mm
4600,6100,8100,9100,11100,13100×
1393×1700
Acceptance Conditions
GB/T4020-199 Alluracy Parallel Lathe
JB/T2322-93 Terms Parallel Lathe
Наши услуги:
восстановление изношенных деталей;
цветной и нержавеющий прокат со склада в Ростове-на-Дону;
механическая обработка металлов( токарные и фрезерные работы);
изготовление валов,валков,подшипников скольжения,втулок(баббитовых,бронзовых,латунных,фторопластовых) и др. деталей по вашим чертежам или изделиям.
"Российское станкостроение" 2000-2011. Россия, г.Ростов-на-Дону ул.Орская 9 тел.(863) 290 88 31, 290 88 30, г.Москва ул. Яна Райниса 18
