CNC lathe machine
10 years Machine Tool Manufacturing
Stable, high efficiency and accurate processing
CK-50
CNC lathe:
There are two types: Plain lathe and Inclined rail lathe. The Inclined rail lathe contain hard rail and line rail.
The model of Plain lathe: CK6130, CK6136, CK6135, CK6150L, CK6150B, CK6163, CK6180, CK-32, CK-50
Specification:
1)Entire Optimization: This series of machine lathe is entirely optimized on the base of the precious plain lathe and individual main axis lathe, with better performance, much more beautiful and practical.
2)Easily upgraded: The imported bearing with high accuracy and high speed can be selected and assorted, the machining accuracy and the efficiency can be upgraded directly, the coupling port for the back-up motive chuck, the high-speed and low-noise leather belt can be selected and employed.
3)Advanced structure: Lathe apron and the dragging board is lengthened and stuck with plastic, slight capacity feeding is accurate, the accuracy is kept permanently. All in one of lathe foot(CK-50 is segregation), with intensified stability and rigidity, with convenient hoisting and installation and with compact and generous structure;
4)Setting on the upper side for the main motor, the main motor is installed on the lathe leg, the short transmission leather belt facilitates the high speed and low noise, easily installed and maintained, easily change the power ( variable frequency and AC servo)
CK-50
Machining accuracy
Positioning accuracy
mm
0.015
Repeatedly Positioning accuracy
mm
0.003
Ellipticity on machining
mm
0.005
Machining roughness
μ m
Ra1.6
Main transmission
Diameter for through hole of main axle
mm
Φ 82
Conicity of inner hole of main axle
1: 20
Main axle type
A2-8
Rotating speed range of main axle
rpm
2200
Electric Power of main axle
kw
7.5
Power supply
Enter power
50 Hz 380V
Machining Range
Maximal turnaround diameter of the lathe
mm
500
Maximal turnaround diameter of the dragging board
mm
300
Maximal machining length
mm
750/1000
Width for rail of lathe bed
mm
400
Electric knife rest
Cutter digit
4, 6 or 8 available
Repeatedly Positioning accuracy
mm
0.003
Tailstock
Bore-hole of tailstock sleeve
NO. 5
Maximal stroke of the tailstock sleeve
mm
150
Diameter of tailstock sleeve
mm
Φ 75
Dimensions and net weight
Dimensions of lathe tool (L x B x H)
mm
2600 1450 1900
Net weight
kg
2500/2600
Наши услуги:
восстановление изношенных деталей;
цветной и нержавеющий прокат со склада в Ростове-на-Дону;
механическая обработка металлов( токарные и фрезерные работы);
изготовление валов,валков,подшипников скольжения,втулок(баббитовых,бронзовых,латунных,фторопластовых) и др. деталей по вашим чертежам или изделиям.
"Российское станкостроение" 2000-2011. Россия, г.Ростов-на-Дону ул.Орская 9 тел.(863) 290 88 31, 290 88 30, г.Москва ул. Яна Райниса 18
