1) The spindle is designed with two sections more flexible in shifting the working modes of vertical milling and horizontal milling;
2) Automatic and rapid feed on all 3 axis;
3) Equipped with indexting head and swival head, greatly increased its functions (e. G. Mill bevel, spiral groove, rack, gears, spline etc)
Model
X6332
Worktable Working Surface Size (W*L)
mm
320*1320
Max Lengthwise Stroke of Worktable (manual/motorized)
mm
700/680
Max lateral Stroke of Worktable (manual/motorized)
mm
300/280
Max Vertical Worktable Stroke(manual/motorized)
mm
400/360
No. of T-slot
3
With of T-slot
mm
18
T-slot Spacing
mm
60
Main Shaft Hole Taper
7:24
Serial No of Main Shaft
ISO NO40
Swivel Angle of Swivel Milling Head
any angle
Back-and-Front Moveable Distance (manual)
mm
480
Distance between Center Line of
Horizontal Main Shaft and Worktable Surface (With Cutter Holder)
mm
35~400
Distance between Center Line of
Horizontal Main Shaft and Worktable Surface (Without Cutter Holder)
mm
0~795
Distance between Vertical Spindle Nose and Worktable Surface
mm
10~360
Distance between Center Line of
Horizontal Spindle and Vertical Guiderail
mm
20~500
Distance between Vertical Guiderail and Center of Worktable Surface
mm
210~490
Spindle Rotation Speed Grade
12
SpindleRotation Speed Range
r/min
40~1950
Worktable Feeding Grade
9
Longitudinal Feeding Scope of Worktable
mm/min
15~430
Transverse Feeding Scope of Worktable
mm/min
15~430
Vertical Feeding Amount Scope of Worktable
mm/min
5~143
Longitudinal & Transverse Rapid Movement Speed of Worktable