APPLICATION:
Universal Swivel Head Milling Machine is a new product that is derived from X6132A Horizontal Universal Milling Machine with horizontal spindle and universal milling head, this machine belongs to horizontal universal compound milling machine. The machine can process horizontal and universal milling during once clamping and features high rigidity, compact structure, large parameter, high efficiency and easy operation. Antifriction measure is used in all sets of guideway and leadscrew. The universal milling head can mill at any angle in front half-sphere. The machine is suitable to plane, groove, drill and bore various workpiece of steel, cast iron and non-ferrous metal and is widely used in all machinery and mould industries.
Name
Unit
X6432A
X6436A
X6440A
X6432A/1
X6436A/1
X6440A/1
Working table (W x L)
mm
320 x 1400
360 x 1400
400 x 1400
320 x 1600
360 x 1600
400 x 1600
T-slot
Number
3
Width
mm
18
Distance
mm
80
Travel of table
Longtudinal (manual/power)
mm
900
1100
Cross (manual/power)
mm
335
Vertical (manual/power)
mm
475/455
Horizontal spindle taper
ISO50
Universal spindle taper
ISO50
Swivel angle
3600
Spindle speeds
Horizontal spindle
r/min
30-1525 (18 stage)
Spindle of universal milling head
r/min
40-1800 (18 stage)
Distance between vertical guideway surface and table center
mm
220-555
Distance between horizontal spindle line and table surface
mm
0-475
Adjustable distance between spindle of universal milling head and vertical guideway
mm
210-685
Feed range of table
Longitudinal
mm/min
22-1028
Cross
mm/min
22-1028
Vertical
mm/min
9-400
Rapid feeds of table
Longitudinal
mm/min
2350
Cross
mm/min
2350
Vertical
mm/min
915
Max. swivel angle of table
+450
Main motor power
kw
7.5
Main motor power of ram
Nm
4
Torque of feed motor
KN
1.5
Max. bearing weight of table
kg
400
Net weight
kg
3500
Overall dimension (L x W x H)
cm
236 x 195 x 210
Наши услуги:
восстановление изношенных деталей;
цветной и нержавеющий прокат со склада в Ростове-на-Дону;
механическая обработка металлов( токарные и фрезерные работы);
изготовление валов,валков,подшипников скольжения,втулок(баббитовых,бронзовых,латунных,фторопластовых) и др. деталей по вашим чертежам или изделиям.
"Российское станкостроение" 2000-2011. Россия, г.Ростов-на-Дону ул.Орская 9 тел.(863) 290 88 31, 290 88 30, г.Москва ул. Яна Райниса 18
