Общие сведения
Название:CNC Machining Center (VMC850)
Модель:VMC850
Класс точности:Обычной точности
Автоматизация:Автомат
Тип:Многофункциональный центр
Product Description

1)  Casting is made by advanced nano Meehanite. Such material is very stable; It can make sure there is no distortion after long term use. Main structure adopts ANSYS limited unit software analysis, to reach highest and best rigid structure design.

2)  We design strong structure to build column, avoid and reduce distortion while cutting.

3)   Nut integrated design
Nut block for screw and main machine body are built together for every axis, with this design, machine will get better rigidity, and won't lost precision while heavy cutting and acceleration movement impact

4)  Adopt three slide blocks for single axis
Adopt three slide blocks for single axis will enhance load capacity around 30%, with this method will improve the load capacity.

5)  Optimized structure of heavy rail linear guide
Comparing with ball screw guide, its lead capacity and damping properties has been improved 30% and 15% respectively: Comparing with hard track guide, dynamic motion function has been improved 300%, at the same condition, the machining efficiency will be 2%-15% better, life of machine will be 3-6 times longer, so without shutting the machine down to repair, it will save 5-20% precious time

6) High accuracy, high inflexible principal axis
Belt transmission type principal axis can provide biggest RPM8000-12000. Special designed principal axis bear configuration, show us the outstanding rigidity of principal head.
Precious ball screw assembly is adopted for X, Y and Z axis, such screw is pre-processed to ensure best precision and minimize the error.

7)  Disc style ATC system

8). Advantage of system
1.  MITSHBISHI choose 64bite high speed CPU and PLC as the heart if control system, not only improve data processing speed, but also raise machining efficiency obviously.
2.  Most advanced hardware is adopted, it is advantage to enhance the ability of high speed processing and the ability of  compensation,
3.  System support various language and can be used worldwide.
4.  Principal axis is connected by parallel bus.
Servo system
Swift response and stable location loop control system will be most beneficial while machining process, it also realize stable control of speed up and speed down.
1.  Adoption of the medium and small model servo motor and high-resolution decoder
2.  Enhance the rigidity of machine tool
3.  Special characteristics in stable control of speeding up and down
4.  Reduce parts processing time and improve the machining precision of parts.

ravel/spaceX/Y/Z axis travelmm1300/700/650Standard accessories :
1.        Electricity box heat exchanger
2.        Auto lubricating unit
3.        Fully closed sheet metal cover for prevent chip
4.        Alarming lamp with three color
5.        Foundation block and supporting
6.        Operation & maintenance manual
7.        Composite fixing plate
8.        Flat clamp
9.        Tool holder and bolt each one
Optional accessories:
1.        Disc ATC system
2.        Umbrella ATC system
3.        Oil cooler for spindle
4.        Water gun for sluicing chips from rear of the machine
5.        Auto chip conveyor
 
Table upper surface to spindle nose end facemm150-800
Table to spindle nosemm770
AccuracyPositioningmm0.012
Repeatabilitymm0.005
TableTable dimensionmm1500*720
Max. load on tableKg1200
Power(X Y Z)mm3.5,3.5,3.5
T shape groovemm18T*P100*5
SpindleSpindle speedrpm6000
Spindle bore taper Taper No.50
Traverse speedRapid speedmm/min24000
Cutting speedmm/min8000
Auto changing tool systemTool holder model BT50
Tool capacitypcs24
Tool exchange time(T-T/C-C)sec3.5/7
Spindle motorSpindle power (30min/successive)KW15/11
powerelectricityKVA30
Air powerMpa/L/min0.6/260
Outer size and weightMachine heightmm3200
Floor spacemm3600*2800
Net weightKg10000

Сайт поставщика: madeinchina.com

Наши услуги:

  • восстановление изношенных деталей;
  • цветной и нержавеющий прокат со склада в Ростове-на-Дону;
  • механическая обработка металлов( токарные и фрезерные работы);
  • изготовление валов,валков,подшипников скольжения,втулок(баббитовых,бронзовых,латунных,фторопластовых) и др. деталей по вашим чертежам или изделиям.
"Российское станкостроение" 2000-2011. Россия, г.Ростов-на-Дону ул.Орская 9 тел.(863) 290 88 31, 290 88 30, г.Москва ул. Яна Райниса 18
Продажа б/у станков в Ростове
Rambler's Top100 рейтинг@Mail.ru