High precision valve seat and valve guide cutting machine especially designed for multi-valve cylinder heads.
Patented workhead with triple air-float patented centering system and built-in spindle motor.
Featuring the new generation of valve seat boring. Provides more than a 30% decrease of cutting forces during Machining. Angular accuracy within ± 0.5 degree guaranteed on multi-angle cutter.
Machining capacity from 0.63"/16 mm to 1.97"/50 mm.
Modern modular machine bed design for improved rigidity.
Computer enhanced static and dynamic characteristics provide The latest in machining technology.
New improved lighting system.
New table bars with pnevmatic locking.
Fully integrated spindle motor,
Infinitely variable speed 100 to 1200 RPM, with sensorless Vector Flux Control. Forward and reverse
Directions. Extremely broad torque ratings from lowest RPM with constant torque spindle rotation. Digital RPM read-out for accurate speed setting.
Patented Workhead with triple Air-Float Automatic Centering System and built-in spindle motor. Greatly reduces the number of free-floating parts during the centering sequence. Results in minimal work-head inertia and maximal floatation for unmatched centering sensitivity.
High quality smooth, 3 tone paint work.
Machine Space requirements
Length
mm / inch
1440/56.7
Width
mm / inch
1050/41.3
Height
mm / inch
2170/85.4
Machine capabitities
Length
mm / inch
Unlimited
Width
mm / inch
500/19.7
Height
mm / inch
450/17.7
Crosswise work piece tiltin g
degrees
+45---15°
Machining capacity dia. (min-max)
mm/inch
16 to 90/0.6-3.5
Work head displacement
Lengthwise
mm / inch
930 / 37
Crosswise
mm / inch
40 / 1.6
Sphere cylinder travel
mm / inch
9 / 0.4
Spindle
Max. spindle inclination
degrees
5
Spindle travel
mm / inch
200 / 8
Spindle motor power
W
1500
Spindle rotation speed
RPM
100 to 1200
Power supply
2.5kVA-230V-AC-1Ph-50/60 Hz
Max. air flow
l/mn -CFM
300 / 11
Level of noise at 400 RPM
Dba
72
Level of noise at 1200 RPM
Dba
82
Net weight approx.
kg / lbs
1050/2310
Наши услуги:
восстановление изношенных деталей;
цветной и нержавеющий прокат со склада в Ростове-на-Дону;
механическая обработка металлов( токарные и фрезерные работы);
изготовление валов,валков,подшипников скольжения,втулок(баббитовых,бронзовых,латунных,фторопластовых) и др. деталей по вашим чертежам или изделиям.
"Российское станкостроение" 2000-2011. Россия, г.Ростов-на-Дону ул.Орская 9 тел.(863) 290 88 31, 290 88 30, г.Москва ул. Яна Райниса 18
