This series lathes are improved from original model design, new standards are adopted. After improvement, rigidity of spindle system is enhanced and is suitable for powerful and high speed cutting. Feed of carriage in longitudinal and cross are fined, thus the surface quality of parts is improved. The machine is available for turning cylinder and cones, and do the works of end turning, grooving, drilling, boring and trepanning, and also can cut all kinds of inside and outside metric threads, inch threads, module threads, etc.
The machine is characterized by compact structure, convenient operation, low noise and high efficiency, and is also provided a complete set of accessories. The machine is especially suitable for various machining industry, such as machine building industry, light-textile industry, petrochemical industry, valve industry, roll industry and so on.
SPECIFICATIONS:
GH61100J
GH61125J
STANDARD EQUIPMENT
Swing Over Bed:
1000mm
1250mm
4-jaw 1000mm chuck
Swing Over Gap:(GH62100T)
--
Follow rest 70~200mm
Swing over carriage:
630mm
880mm
Revolving center
Max. turning length:
1000~10000mm
Oil gun
Max. weight of workpiece between centers:
6000kg
Special tools
Width of the bed:
755mm 30 "
Center sleeve
Spindle noses No.:
1:20
Steady rest 70~600mm
Diameter of spindle front bearing:
200mm 8 "
Auto travel of carriage
Diameter of spindle hole:
100mm 4"
Auto travel of cross slide
Taper hole of spindle:
Metric No.140
OPTIONAL ACCESSORIES
Number of spindle speeds:
12
Digital readout device
Range of spindle speeds:
6~272rpm
4.25~192rpm
Open type steady rest 480~880mm
Main motor power:
AC 22 KW
Auto travel of compound slide
Workpiece held on the steady rest
70~480mm
Section of tool shank:
45 x 45mm 1.8" x 1.8"
Grinder
Max. travel of top slide
350mm
Rapid moving speed of tool post
Longitudinal 1.2m/min
Cross 0.6m/min
Metric Threads number and range:
46,1~224mm
Inch threads number and range:
46,28 ~ 1T.P.I.
Modul threads number and range:
37,0.25 ~ 56mm
Number and range of longitudinal feeds:
48,0.057 ~ 12.726mm/rev
Number and range of transverse feeds:
48,0.027 ~ 6.096mm/rev
Diameter of Tailstock Quill:
140mm
Taper hole of tailstock Quill:
Morse No.6
Travel of tailstock quill:
300mm 12"
Weight of the lathe with 3m
11900kg
13000kg
Overall dimension(L x W x H)(3m)
6440x2230x2155mm
6440x2230x2280mm
Наши услуги:
восстановление изношенных деталей;
цветной и нержавеющий прокат со склада в Ростове-на-Дону;
механическая обработка металлов( токарные и фрезерные работы);
изготовление валов,валков,подшипников скольжения,втулок(баббитовых,бронзовых,латунных,фторопластовых) и др. деталей по вашим чертежам или изделиям.
"Российское станкостроение" 2000-2011. Россия, г.Ростов-на-Дону ул.Орская 9 тел.(863) 290 88 31, 290 88 30, г.Москва ул. Яна Райниса 18
