1)the main machine components(machine bed, sliding saddle, worktable)have adopted the structure of thermal symmetry and thin-walled main stock with multi-layer ribs. Arch" shape column with high rigidity goes through optimized treatment by finite element analysis to guarantee the best rigidity;
2)the adoption of C3 grade precise ball screws and the use of special bearing on the ball screw with pre-pull treatment as well as laser detective compensation have ensured the rigidity and precision.
3)The main base parts of machine are made from high-grade, high quality gray casting iron with aging treatment, the guide rails with high-frequency quenching treatment and delicate grinding, covered with low frictional coefficient TURCITE-B and dealt with delicate scraping, having effectively improved motional quality of machine and necessary touching rigidity for cutting.
4)The adoption of balance weight block with motion-based device has prevented the spindle form vibration when weight-balanced block moves up and down, avoiding influencing the processing accuracy.
Model No.
NV36
Capacity
X axis travel/mm
600
Y axis travel/mm
360
Z axis travel/mm
450
Spindle nose to table surface/mm
150-600
Spindle nose to column surface/mm
380
Worktable
Table size/(L*W)
700*360
Max load on the table/kgs
300
T-slot size/mm
18*3*110
Spindle
Spindle speed/rpm
60-8000
Spindle taper shank
BT40
Max spindle inner diameter/mm
Φ 60
Spindle motor/kw
5.5
Feedrate
X, Y, Z rapid traverse/M/min
15/15/15
Max cutting feedrate(M/min)
10
A. T. C
Tool storage capacity/pcs
drum type 12
Max tool dia(adjacent tools)/mm
Φ 150(80)
Max tool length/mm
300
Tool change time(T-T)/sec
7
Accuracy
Positioning accuracy/mm
± 0.012
Repeatability positioning accuracy/mm
± 0.008
Machine size
Machine height/mm
2260
Space requirement(L*W)
2500*1870
Net machine weight/kgs
3000
Power requirement/KVA
10
Drive motor/kw
1.0/1.0/1.0
Control system
SYNTEC EZ10B
Наши услуги:
восстановление изношенных деталей;
цветной и нержавеющий прокат со склада в Ростове-на-Дону;
механическая обработка металлов( токарные и фрезерные работы);
изготовление валов,валков,подшипников скольжения,втулок(баббитовых,бронзовых,латунных,фторопластовых) и др. деталей по вашим чертежам или изделиям.
"Российское станкостроение" 2000-2011. Россия, г.Ростов-на-Дону ул.Орская 9 тел.(863) 290 88 31, 290 88 30, г.Москва ул. Яна Райниса 18
