The operation of the machine is simple and convenient. The principal axis is driven by DC servo motor or step-by-step motor with the advantages of speed adjustable, stabiliby good and noise lower. When the worktable moves, the light grating shows. The work liquid can be running water or pure water. (distilled water or deionized water) with better results.
The machine mainly drills small holes with big depth-diameter ratio(200: 1) on stainless steel, chilled steel, strong alloy, copper and aluminum.
The machine can also erode away the auger and taper tap broken in the work piece without damaging the original hole or threads.
SXD720C with digital reader, marble made worktable, step motor, normal water pump.
SXD720D with digital reader, marble made worktable, servo motor, high quality water pump.
Type
SXD 720C
SXD720D
Diameter of electrode
Φ 0.5- Φ 3
Principal axis head route of travel
300(step by step system)
300(servo system)
Work table dimension
320 × 400
X-Y axis travel
200 × 250
Distance between oriented piece&table
100-300(manually)
60-260(mechanically)
Max. machine speed
5-60(different materials)
Max. machine current
30
Input power
3.5
Output voltage
380/50
Work liquid
Running water or pure water
Work liquid filtering
Shallow slot
Max. pressure of work liquid
6
8
Overall dimension
950 x 750 x 1700
1090 x 750 x 1800
Machine weight
700
Наши услуги:
восстановление изношенных деталей;
цветной и нержавеющий прокат со склада в Ростове-на-Дону;
механическая обработка металлов( токарные и фрезерные работы);
изготовление валов,валков,подшипников скольжения,втулок(баббитовых,бронзовых,латунных,фторопластовых) и др. деталей по вашим чертежам или изделиям.
"Российское станкостроение" 2000-2011. Россия, г.Ростов-на-Дону ул.Орская 9 тел.(863) 290 88 31, 290 88 30, г.Москва ул. Яна Райниса 18
