1)the machine have features of smooth mainstock movement up and down, pnematic cylinder, servo motor control, full enclosed cover, variable-frequency speed adjustment, 3-4 second semi-automatic tool change, BT40 spindle taper, and compatibility with machinng center. Servo motor and stepper motor are optional for the machine and the machine can adopt the same machine cover and cooling systeme as the machining center.
2)The functions of machines can be choosed on the base of different requirement of clients, saving the investment cost;
3)the machines are suitable for drilling, hole-enlarging, reaming, bevel edge, and tapping, for surface milling, step plane, slope, and milling groove, for cutting and milling curve, curve surface and cam, and for the management of several sets of machines
4)Automatic tool change is suitable for several continuous complicated processings on the base of one-time tool change
Model No.
CNC/TX40
Working table(length*width)/mm
800*400
Axis travel(X*Y*Z)/mm
800*400*400
Spindle nose to working table/mm
600
Spindle to column surface/mm
400
Spindle taper
BT40
Main spindle speed /R.P.M
150-3000
Spindle motor power/kw
5.5/7.5 variable-frequency motor
Ball screw type
4010 ball screw
Max reduction ratio
1:1
Max torque/N.m
50
Tool change type
Semi-automatic
Mini display unit/mm
0.001
Drive motor(torque/power)N.m/kw
1.5/2.3 servo motor
Processing for
Drilling,tapping,boring & milling with high speed
Overall dimension/mm
2450*2550*2650
Net weight/kgs
4500
controller
SYNTEC EZ4M
Standard accessories:
*mill chuck BT40-ER32(3-20): 1 full set.
*photoelectric edge finder :1 set
*tool-lock block(BT40):1 pc
*inner hexagon wrench 4 ,5 ,6 ,8 ,10:1 set
*solid wrench12-14,17-19: 2 pieces
*fuse(2A ,4A ,6A):3 pieces
*machine leveling :6 pieces,Φ300
*clinch rivets: 1 piece P40T-1 45° (pneumatic cylinder for tool change )
*screw:12 pieces (M6×30) (for full cover)
*data cables:1 piece
Наши услуги:
восстановление изношенных деталей;
цветной и нержавеющий прокат со склада в Ростове-на-Дону;
механическая обработка металлов( токарные и фрезерные работы);
изготовление валов,валков,подшипников скольжения,втулок(баббитовых,бронзовых,латунных,фторопластовых) и др. деталей по вашим чертежам или изделиям.
"Российское станкостроение" 2000-2011. Россия, г.Ростов-на-Дону ул.Орская 9 тел.(863) 290 88 31, 290 88 30, г.Москва ул. Яна Райниса 18
