Feature:
1. Precision ground and supersonic frequency hardened bed ways is designed in double wall structure, giving superb rigidity.
2. The spindle system is high in rigidity and accuracy.
3. The design of the main drive is optimized and the gears in the headstock are precision ground.
4. The noise of the machine is low.
5. There is no need for change gears.
6. An automatic stopping device is used to realize automatic stop for the machine of a certain length workpiece, which is safe and eliable.
7. Apedal braking device providing quick and effective stop while operationg.
Standard Accessories:
3-Jaw Chuck
4-Jaw Chuck
Steady Rest
Follow Rest
Face Plate
Work Light
Chip Pan
Coolant Pump
Tool Box&Tools
Change Gears
Dial Indicator
Splash Guard
Dead Center and Center Sleeve
Optional Accessories:
Tool Post Guard
CE Leadscrew Cover
Digital Read out
Taper Turning Attachment
Right Handwheel is Alternative
CE Chuck Guard With Micro Switch
Model
BL-GBL-JT4110
BL-GBL-JT4115
Swing Over Bed
410mm(16" )
410mm(16" )
Swing Over Cross Slide
255mm(10" )
255mm(10" )
Swing In Gap
580mm(22" )
580mm(22" )
Height Of Center
205mm(8" )
205mm(8" )
Max. Length Of Workpiece
1000mm(40" )
1500mm(60" )
Bed Width
250mm(10" )
Cutting Tool Max. Section
20*20mm(3/4*3/4)
Total Travel Of Cross Slide
210mm(8 1/2" )
Total Travel Of Top Slide
140mm(5 1/2" )
Spindle Bore
52mm(2" )
Spindle Morse Taper In Bore
M. T. No. 6
Spindle Speeds Number
16
Spindle Speeds Range
45-1800R. P. M
Treads Imperial Pitches
2-72T. P. I(45Nos)
Treads Metric Pitches
0.2-14mm(39Nos)
Longitudinal Feeds Imperial
0.002" -0.067" /Rev(17Nos)
Longitudinal Feeds Metric
0.05-0.1.7mm/Rev(17Nos)
Cross Feeds Imperial
0.001" -0.0335" /Rev(17Nos)
Cross Feeds Metric
0.025-0.85mm/Rev(17Nos)
Range Of Moulder Pitches
0.3-3.5MP(21Nos)
Total Travel Of Tailstock Quill
50mm(2" )
Tailstock Quill Diameter
120mm(4 3/4" )
Taper In Tailstock Quill
M. T. No. 4
Spindle Drive Motor
4P/8P, 3PH 3.3/2.2Kw or 4.5/3Kw
Coolant Pump Motor
4P, 3PH 90W
Packing Size(L*W*H)
206(81" )(256)*90(35 7/16" )*164cm(64 9/16" )
Net Weight(KG)
1550Kg
1600kg
Cross Weight(KG)
1750Kg
1755kg
Наши услуги:
восстановление изношенных деталей;
цветной и нержавеющий прокат со склада в Ростове-на-Дону;
механическая обработка металлов( токарные и фрезерные работы);
изготовление валов,валков,подшипников скольжения,втулок(баббитовых,бронзовых,латунных,фторопластовых) и др. деталей по вашим чертежам или изделиям.
"Российское станкостроение" 2000-2011. Россия, г.Ростов-на-Дону ул.Орская 9 тел.(863) 290 88 31, 290 88 30, г.Москва ул. Яна Райниса 18
