Общие сведения
Название:Hydraulic Shearing Machine (QC12Y 10X320
Модель:QC12Y 10X3200
Тип:Гильотина
Product Description

Performance:
* Frame welded, vibration to eliminate stress, high in rigidity, sturdy and durable, easy operation and maintenance.
* Hydraulic drive, swing beam, return of knife beam is smooth and prompt by accumulator or nitrogen cylinder, steady & reliable performance.
* The position of low blade can be adjusted to ensure the equilibrium of the gap after regrinding.
* The portable and prompt adjustment of the blades' gap, the value of gap is indicated by dial, positioning reliable.
* Setting the backgauge by motor. The display devices used to the backgauge' value and the shearing times are on the front of the machine.
* The stroke of knife beam can be adjusted steplessly for promoting production on the strip cutting, conveniently and fast.
* Preselection of single or continous. Preselection cutting number and cutting strokes.
* Roller guide to ensure the quality of cutting sheet-metal.
* Equipped with lighting-alignment (shadow light ) device, so as to align when shearing.
* Protection fence and the eletric interlocker to ensure the operation safety. Power supply swtich that is set in the electric box will be automatically turned off when the box's door is opened or the fence is turned up.
* Protecting barrier with safety interlocker. Besides, there are travel limit protection and foot pedestal mounted emergency off switch.
Optional:
* The adjusted value can be shown on the digital readout (electronic display).
* Pneumatic sheet support.
* Any tailer-made are available on request.

NO.
 
Item
 
Parameter value
 
Unit
 
Remark
 
1
 
Shearing length
 
320 0
 
mm
 

 
2
 
Max cutting thickness
 
10
 
mm
 

 
3
 
Cutting angle
 
1 0 30’
 

 

 
4
 
Quantity of pressure plate feet
 
12
 
pieces
 

 
5
 
Number of strokes
 
3-7
 
Min -1
 

 
6
 
Depth of throat
 
200
 
mm
 

 
7
 
Back stopper stroke
 
600
 
mm
 

 
8
 
Motor power
 
18 .5
 
Kw
 

 

Сайт поставщика: madeinchina.com

Наши услуги:

  • восстановление изношенных деталей;
  • цветной и нержавеющий прокат со склада в Ростове-на-Дону;
  • механическая обработка металлов( токарные и фрезерные работы);
  • изготовление валов,валков,подшипников скольжения,втулок(баббитовых,бронзовых,латунных,фторопластовых) и др. деталей по вашим чертежам или изделиям.
"Российское станкостроение" 2000-2011. Россия, г.Ростов-на-Дону ул.Орская 9 тел.(863) 290 88 31, 290 88 30, г.Москва ул. Яна Райниса 18
Продажа б/у станков в Ростове
Rambler's Top100 рейтинг@Mail.ru