Общие сведения
Название:CNC Lathe Machine (FT-620)
Торговая марка:Guheng
Класс точности:Высокоточный
Тип:Токарный станок
Product Description

CNC Lathe Machine (FT-620)

FANUC motor
The spindle motor has high power and torque (11/15kw), so that it can process many kinds of material by milling, turning, drilling and indexing precise machining.

VDI dynamic turret processing
This machine adopts high rigidity servo VDI dynamic turret (12 tools), which makes turning and milling compound function achieved. A work piece can be turned, milled, drilled and tapped in the same machine. So clearance error caused by work piece moving can be avoided. Moreover, much time and labors will be saved.

High precision and high rigidity spindle
Spindles adopt high-precision NSK P4 class bevel ball bearings to get the maximized span configuration according to the calculation and analyses, high-tech lubricating technology and high rigidity.

12-tool dynamic turret and C-axis mechanism
VDI type power turret combined with C axis mechanism do milling action on the turning work piece to complete all the processing work for one time and VDI type tool is easy to disassemble and install tools.

Program tailstock (special accessory)
The track of tailstock adopts linear glides with the auxiliary hydraulic cylinder to form the perfect tailstock program, which withstands the work piece in the overall moving way to eliminate moving clearance error caused by the traditional mandrel removal.

Laser correction
When guide screws do the screw pitch compensation, no matter where the machine is, the high-precision optical laser equipment can ensure that the positioning accuracy of the lathe, so the accuracy and stability of the processing pieces can be enhanced

Tool measurement system
(special accessory)
Manual or automatic tool measurement system, can set tool coordinate location, the tool breakage, tool corner wear abrasion, the screen display correction functions to enhance work efficiency.

Machine specifications   machine accessories 
machine type FT-620 unit   Standard accessories number 
Spindle Spindle nose type ANSI A2-6     Program tailstock  1set
Dia. of spindle bore ø 77 mm   Ø 25Tool post 5pieces
Dia. of chuck  10"     Tool Inclined plate group 10groups
Spindle center height to floor  1090 mm   Boring cutter bushingsØ 8, Ø 10, Ø 12, Ø 16, Ø 20, Ø 25 1set
Spindle center height to front door  360 mm   Ø 40boring cutter post 1piece
FANUC control system Spindle motor rating  11/15 kw   Hard jaw 1group 
Base spindle speed 900 rpm   Soft jaw 1group 
Max. spindle speed  3500 rpm   Bar feeder interface   
Spindle output torque    52.5 N-m     ø 25Radial tool post 2pieces
X axis servo motor  1.8 kw   Halogen work lamp 1set
Z axis servo motor 1.8 kw   Foot switch 1set
max. swing over bed  ø 445 mm   Chip conveyor  1set
Max. machining length 650 mm   Live center(only used for FT-620) 1set
Max. machining dia. ø 400 mm   Work lamp 1set
Max. diameter of  bar bore ø 64 mm   Tool kit, operation manuals 1set
X/Z axis traverse X axis stroke  210 mm   Special accessories
Z axis stroke 700 mm   Vertical servo tool  1set
X/Z axis rapid traverse rate  30 m/min   FANUC OITD controller 1set
Machine accuracy  X/Z axis repeatability  0.003 mm   Part catcher  1set
Positioning precision ± 0.005 mm   Manual measurement tool 1set
Chip    removal  coolant tank capacity 150 liter   Automatic measurement tool  1set
coolant pressure  3.5 bar   Bar feeder 1set
Tools turret  Tools turret motor  hydraulic motor SET   High pressure coolant pump 1set
Tool number  10 pce   Dynamic turret and C-axis 1set
4 bearing tool post specifications  25 mm   Program tailstock  1set
Boring cutter post specifications ø 40 mm    
Adjacent tool changing time 0.25 sec      
Dimension L× W× H 3500*1600*1700 mm      
Weight  4000 kg      
Area(contain chip conveyor) 5.6      

Сайт поставщика: madeinchina.com

Наши услуги:

  • восстановление изношенных деталей;
  • цветной и нержавеющий прокат со склада в Ростове-на-Дону;
  • механическая обработка металлов( токарные и фрезерные работы);
  • изготовление валов,валков,подшипников скольжения,втулок(баббитовых,бронзовых,латунных,фторопластовых) и др. деталей по вашим чертежам или изделиям.
"Российское станкостроение" 2000-2011. Россия, г.Ростов-на-Дону ул.Орская 9 тел.(863) 290 88 31, 290 88 30, г.Москва ул. Яна Райниса 18
Продажа б/у станков в Ростове
Rambler's Top100 рейтинг@Mail.ru