Общие сведения
Название:Big Lathe (GH61100J)
Модель:GH61100J
Тип:Токарный станок
Product Description

This series lathes are improved from original model design, new standards are adopted. After improvement, rigidity of spindle system is enhanced and is suitable for powerful and high speed cutting. Feed of carriage in longitudinal and cross are fined, thus the surface quality of parts is improved. The machine is available for turning cylinder and cones, and do the works of end turning, grooving, drilling, boring and trepanning, and also can cut all kinds of inside and outside metric threads, inch threads, module threads, etc.
The machine is characterized by compact structure, convenient operation, low noise and high efficiency, and is also provided a complete set of accessories. The machine is especially suitable for various machining industry, such as machine building industry, light-textile industry, petrochemical industry, valve industry, roll industry and so on.

SPECIFICATIONS:  GH61100JGH61125J  STANDARD EQUIPMENT
Swing Over Bed:1000mm
 
1250mm 4-jaw 1000mm chuck
Swing Over Gap:(GH62100T)--
 
 Follow rest    70~200mm
 
Swing over carriage:
 
630mm
 
880mm Revolving center
Max. turning length:1000~10000mm Oil gun
Max. weight of workpiece between centers:6000kg Special tools
Width of the bed:755mm 30 " Center sleeve
Spindle noses No.:1:20
 
 Steady rest   70~600mm
Diameter of spindle front bearing:200mm 8 " Auto travel of carriage
 
Diameter of spindle hole:100mm 4" Auto travel of cross slide
Taper hole of spindle:Metric No.140OPTIONAL ACCESSORIES
 
Number of spindle speeds:12 Digital readout device
Range of spindle speeds:6~272rpm4.25~192rpm Open type steady rest   480~880mm 
Main motor power:AC 22 KW Auto travel of compound slide
Workpiece held on the steady rest70~480mm
Section of tool shank:45 x 45mm 1.8" x 1.8" Grinder
Max. travel of top slide350mm 
Rapid moving speed of tool postLongitudinal 1.2m/min 
 Cross 0.6m/min 
Metric Threads number and range:46    1~224mm 
Inch threads number and range:46    28 ~ 1T.P.I. 
Modul threads number and range:37    0.25 ~ 56mm 
Number and range of longitudinal feeds:48    0.057 ~ 12.726mm/rev 
Number and range of transverse feeds:48    0.027 ~ 6.096mm/rev 
Diameter of Tailstock Quill:140mm 
Taper hole of tailstock Quill:Morse No.6 
Travel of tailstock quill:300mm 12" 
Weight of the lathe with 3m11900kg13000kg 
Overall dimension(L x W x H)(3m)6440x2230x2155mm6440x2230x2280mm 

Сайт поставщика: madeinchina.com

Наши услуги:

  • восстановление изношенных деталей;
  • цветной и нержавеющий прокат со склада в Ростове-на-Дону;
  • механическая обработка металлов( токарные и фрезерные работы);
  • изготовление валов,валков,подшипников скольжения,втулок(баббитовых,бронзовых,латунных,фторопластовых) и др. деталей по вашим чертежам или изделиям.
"Российское станкостроение" 2000-2011. Россия, г.Ростов-на-Дону ул.Орская 9 тел.(863) 290 88 31, 290 88 30, г.Москва ул. Яна Райниса 18
Продажа б/у станков в Ростове
Rambler's Top100 рейтинг@Mail.ru